Gypsol
Gypsol screed is made from high-quality Gypsol anhydrite binder, specially selected sands, and clean water. Therefore, it offers the user a simple and effective floor-screeding solution for floating, unbonded, or fully bonded applications where you use a subsequent floor covering.
Benefits of using Gypsol include rapid application, reduced depth of screed, fast drying, rapid commissioning of underfloor heating, rapid return to service of work areas and assured high strength.
Gypsol screeds can be installed at reduced depths as follows… 40mm Floating Commercial 35mm Floating Domestic 30mm Unbonded 25mm Bonded 25mm cover to underfloor heating pipes.
Gypsol Products & Data Sheets
-
Gypsol classic is a general-purpose screeding system. The most commonly used material in the range.
Click Here for Technical Data Sheet
-
Gypsol Rapide is a self-compacting, self-smoothing, fast-drying floor screed using Gypsol Complete binder.
Click Here for Technical Data Sheet
-
Gypsol HTC is screed made for use with underfloor heating and cooling systems.
Click Here for Technical Data Sheet
-
Gyspol XS is an extra strength material for use in heavy-duty applications, where loading is likely to be higher than normal.
Click Here for Technical Data Sheet
-
Gypsol TS15 is an ultra-thin screed for bonded and un-bonded applications at a minimum depth of 15mm.
Gypsol TS20 is a thin screed suitable for bonded and un-bonded applications down to a 20mm minimum depth.
Click Here for the TS15 Technical Data Sheet
Click Here for the TS20 Technical Data Sheet